Speaker - HP Compaq dc7100 DT Reference Manual

6.20 Speaker

1. Prepare the computer for disassembly (Section 6.1).
2. Remove the computer access panel (Section 6.5).
3. Disconnect the speaker wire from the system board.
4. Remove the four screws from the inside of the chassis 1 that secure the speaker to the
chassis.
5. Remove the speaker 2.
To install the speaker, reverse the removal procedures.
Service Reference Guide, dc7100
Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis
361288-003 6–37