Solving Diskette Problems - HP Compaq dc7100 DT Reference Manual

Solving Diskette Problems

Solving Diskette Problems
Problem
Diskette drive light stays on.
Drive not found.
Diskette drive cannot write
to a diskette.
Cannot format diskette.
D–6
Cause
Diskette is damaged.
Diskette is incorrectly
inserted.
Drive button is not
pushed in.
Files on diskette are
damaged.
Drive cable is not
properly connected.
Cable is loose.
Removable drive is not
seated properly.
You attempted to hot
plug a removable
hard drive that has
DriveLock security
enabled. (This feature
supported on select
models only.)
Diskette is not
formatted.
Diskette is
write-protected.
Writing to the wrong
drive.
Not enough space is
left on the diskette.
Diskette write control is
enabled.
Diskette is damaged.
Invalid media reported.
361288-003
Solution
In Microsoft Windows XP, right-click
Start, click Explore, and select a
drive. Select File > Properties >
Tools. Under Error-checking,
click Check Now.
Remove diskette and reinsert.
Push in drive button.
Check the program diskettes.
Reconnect power cable. Ensure that
all four pins are connected.
Reseat diskette drive data and
power cables.
Reseat the drive.
Shut down the computer. Insert the
drive into the MultiBay, if it is not
already inserted. Turn on the
computer.
Format the diskette.
Use another diskette or remove the
write protection.
Check the drive letter in the path
statement.
Use another diskette.
Use Computer Setup to check the
storage security feature disabled
settings.
Replace the damaged disk.
When formatting a disk in MS-DOS,
you may need to specify diskette
capacity. For example, to format a
1.44-MB diskette, type the following
command at the MS-DOS prompt:
FORMAT A: /F:1440
Service Reference Guide, dc7100