Removing A High-Speed I/O-Module Interposer Card - IBM BladeCenter HT 8740 Problem Determination And Service Manual

Removing a high-speed I/O-module interposer card

1. Read the safety information that begins on page vii and "Installation guidelines"
2. Remove the high-speed I/O-module interposer from which you want to remove
3. The high-speed I/O-module interposer consists of an interposer tray and an
4. Remove the five thumbscrews that secure the interposer card to the interposer
5. Use your hand to grab the edges of the interposer card and lift it off the
6. If you are instructed to return the interposer, follow all packaging instructions
68
BladeCenter HT Type 8740 and 8750: Problem Determination and Service Guide
on page 31.
the interposer card (see "Removing a high-speed I/O-module interposer tray" on
page 66).
interposer card. Orient the I/O-module interposer so the interposer card is
visible.
tray.
interposer tray.
and use any packaging materials for shipping that are supplied to you.