Removing a fan pack
To remove a fan pack from a power module, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Remove the selected power module (see "Removing a power module" on page
3. With the power module rear connector facing up, rotate the handle down so that
4. Press the blue release tabs on each side of the fan pack.
5. Pull the fan pack away from the power module.
6. If you are instructed to return the fan pack, follow all packaging instructions and
58
BladeCenter HT Type 8740 and 8750: Problem Determination and Service Guide
on page 31.
55).
it is parallel with the bottom of the module.
use any packaging materials for shipping that are supplied to you.