Table of Contents
Advertisement
v High-speed I/O module interposers: Slide each high-speed I/O-module
interposer or tray into the BladeCenter HT; then, push the release handles
to the closed position (see "Installing a high-speed I/O-module interposer
tray" on page 67).
v Management module interposers: Slide each management-module
interposer or tray into the BladeCenter HT; then, push the release handle to
the closed position (see "Installing a management-module interposer" on
page 74).
9. Install the following components into the front of the BladeCenter HT unit:
v I/O modules: Slide each I/O-module or filler into the BladeCenter HT; then,
push the release handle to the closed position (see "Installing an I/O
module" on page 65).
v High-speed I/O modules: Slide each high-speed I/O module or filler into the
BladeCenter HT; then, push the release handles to the closed position (see
"Installing a high-speed I/O module" on page 72).
v Management modules: Slide each management module or filler into the
BladeCenter HT; then, push the release handle to the closed position (see
"Installing a management module" on page 76).
10. Reconnect the power to the BladeCenter HT unit (see "Supplying power to the
BladeCenter HT unit" on page 6).
11. Slide each power module or filler into the bay; then, push the release handle to
the closed position (see "Installing a power module" on page 57).
12. Restart any blade servers that were shut down in the BladeCenter HT unit.
See the documentation that comes with the blade server for detailed
instructions.
13. Update the vital product data (VPD) for the BladeCenter:
a. Log into the advanced management module Web interface.
b. In the navigation pane, click Monitor → Hardware VPD.
c. Click Chassis.
d. Click Edit BladeCenter System Vital Product Data.
e. Obtain the model number and serial number on the ID label on the
BladeCenter; then, enter the information in the Type/Model and Serial
Number fields.
f. If the advanced management module is using firmware version BPET54R
or older, restart the advanced management module.
Chapter 4. Removing and replacing BladeCenter HT components
99
Advertisement
Table of Contents
