Installing A High-Speed I/O-Module Interposer Tray - IBM BladeCenter HT 8740 Problem Determination And Service Manual

Installing a high-speed I/O-module interposer tray

To install a high-speed I/O-module interposer or interposer tray, complete the
following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Make sure that the high-speed I/O-module interposer release handles are in the
3. Slide the interposer into the module bay until it stops.
4. Push the release handles to the closed position.
5. Install a high-speed I/O module or filler (see "Installing a high-speed I/O module"
on page 31.
open position.
on page 72).
Chapter 4. Removing and replacing BladeCenter HT components
67