Advanced Users: Setting Up The E-Features; Before You Begin; Step 1: Open The E-Diagtools Networking Parameters Screen - HP Brio BA300 User Manual

3 Updating the BIOS and Sending the Support Ticket

Advanced Users: Setting Up the e-Features

Advanced Users: Setting Up the e-Features
This section is recommended for advanced users.
HP Notebook PCs
If you have an HP Notebook computer, refer to chapter 8, "e-Diagtools for Windows" for
all information about setting up and using e-features.

Before You Begin

Before you begin, your computer should have the HP Utility Partition on the hard disk
(or e-Diagtools on CD-ROM if you do not need to use the e-Diagtools BIOS update
feature).

Step 1: Open the e-Diagtools Networking Parameters Screen

You can do this by running e-Diagtools as usual (for instructions, refer to chapter 2,
"Starting e-Diagtools"), then clicking the menu option to update the BIOS or send the
Support Ticket. The Networking Parameters screen will open automatically.
34 English