HP Vectra VL420 Quick Start

in the box
F
I
1
a b
c
Printed
11/2001
PN:
©2001 Hewlett-Packard Company
final steps
3
a
DVD Playback
Software
DVD Playback Software CD-ROM for:
Software Microsoft® Windows® 98
Software CD-ROM for: Use this CD-ROM Second Edition, Windows®
NT 4.0 (Service pack 4, 5, 6 or 6a),
Microsoft® Windows® 98 to install the DVD
Use this CD-ROM Second Edition, Windows® playback Windows® 2000 and Windows® XP.
to install the DVD NT 4.0 (Service pack 4, 5, 6 or 6a), software.
playback Windows® 2000 and Windows® XP.
b software.
WinDVD TM 2000 All right reserved.
2001 Intervideo Inc.
©
All right reserved.
WinDVD is a trademark of
InterVideo Inc.
commercial computer software
commercial computer software
This HP Software product is
copyrighted and licensed by HP.
This HP Software product is Carefully read the software licence agreement in your installation
copyrighted and licensed by HP. guide or user's guide before
Carefully read the software licence using this software product.
agreement in your installation
guide or user's guide before
using this software product.
© Copyright 2001 Hewlett-Packard Company
© Copyright 2001 Hewlett-Packard Company
operating system hp pc
backup cd-rom 1/2 image engineer -
operating system hp pc image creation and
image engineer - recovery cd-rom
backup cd-rom 1/2 Boot on this cd-rom to
image creation and
start the recovery process. W2K - DT and NT4 - DT SP6 - English
c recovery cd-rom
Boot on this cd-rom to
start the recovery process. http://www.hp.com/go/support W2K - DT and NT4 - DT SP6 - English
http://www.hp.com/go/support For distribution only with a new HP PC.
Store this cd-rom in a safe place. hp p/n : 5970-0510-EN
For distribution only with a new HP PC.
Store this cd-rom in a safe place. hp p/n : 5970-0510-EN commercial computer software
This cd-rom contains system recovery
software for backup purposes only.
commercial computer software The performance of this software is
the sole responsibility of HP. Carefully
This cd-rom contains system recovery read the software license agreement
software for backup purposes only. in the documentation before using
The performance of this software is the software. For regional support
the sole responsibility of HP. Carefully information, refer to the paper operating system
read the software license agreement documentation.
in the documentation before using backup cd-rom 1/2
the software. For regional support
information, refer to the paper
documentation. Portions © 1985-2000 Microsoft Corporation.
All rights reserved.
© Copyright 2001 Hewlett-Packard start the recovery process.
Portions © 1985-2000 Microsoft Corporation. Company
All rights reserved.
© Copyright 2001 Hewlett-Packard
Company
contenu Lieferumfang
D
nella scatola E en la caja
d
e
DVD Playback
Software
DVD Playback Software CD-ROM for:
Software Microsoft® Windows® 98
Software CD-ROM for: Use this CD-ROM Second Edition, Windows®
Microsoft® Windows® 98 to install the DVD NT 4.0 (Service pack 4, 5, 6 or 6a),
Use this CD-ROM Second Edition, Windows® playback Windows® 2000 and Windows® XP.
to install the DVD NT 4.0 (Service pack 4, 5, 6 or 6a), software.
playback Windows® 2000 and Windows® XP.
software. WinDVD TM 2000 All right reserved.
© 2001 Intervideo Inc.
All right reserved.
WinDVD is a trademark of
InterVideo Inc.
commercial computer software
commercial computer software
copyrighted and licensed by HP. This HP Software product is
Carefully read the software licence
copyrighted and licensed by HP. This HP Software product is agreement in your installation guide or user's guide before
Carefully read the software licence using this software product.
guide or user's guide before agreement in your installation
using this software product.
Copyright 2001 Hewlett-Packard Company ©
Copyright 2001 Hewlett-Packard Company ©
operating system hp pc
image engineer -
backup cd-rom 1/2
image creation and
Boot on this cd-rom to recovery cd-rom
start the recovery process.
http://www.hp.com/go/support
http://www.hp.com/go/support For distribution only with a new HP PC.
Store this cd-rom in a safe place.
For distribution only with a new HP PC.
Store this cd-rom in a safe place.
Portions
All rights reserved.
© Company
étapes finales letzte Schritte
F D
I fasi finali E últimos pasos
a Plug the power cord into the wall outlet and turn on your PC.
Follow the onscreen instructions to install your operating system and drivers.
b For your PC to work correctly, you may have to install applications and
utilities for devices such as CD-RW and DVD drives from the CDs provided.
c If you want to downgrade or recover your OS, you must use the blue
Creation & Recovery CD and Image Library & Diagnostics CD
your PC.
a Branchez le cordon d'alimentation sur une prise secteur et allumez le PC.
Installez système d'exploitation et pilotes selon les instructions à l'écran.
b Pour que votre PC fonctionne correctement, vous devrez peut-être installer
F
des applications et des utilitaires pour les périphériques tels que les
lecteurs de CD-RW et de DVD-ROM, à partir des CD fournis.
c Pour "rétrograder" ou récupérer le système d'exploitation, utilisez le
CD de création d'image et de récupération
Diagnostics fournis avec votre PC.
a Netzkabel an Netzsteckdose anschließen und PC einschalten.
Anweisungen zum Installieren von Betriebssystem und Treibern befolgen.
b Damit der PC korrekt funktioniert, müssen ggf. Anwendungen und Dienst-
D
programme für Geräte (wie CD-RW- und DVD-Laufwerke) von den mitge-
lieferten CDs installiert werden.
c Auf der mitgelieferten blauen Abbilderstellungs- und Wiederherstellungs-
CD-ROM und Image Library & Diagnostics CD
Betriebssystemversion für Downgrades und Wiederherstellungen.
a Inserire il cavo di alimentazione nella presa a muro e accendere il PC.
Seguire le istruzioni a video per installare il sistema operativo e i driver.
b Affinché il PC funzioni correttamente, usare i CD in dotazione per
I
installare le applicazioni e le utilità delle periferiche, come le unità
CD-RW e DVD.
c Per passare a una versione precedente o recuperare il sistema operativo
usare il CD-ROM di recupero e creazione immagine
& Diagnostics CD in dotazione al PC.
a Conecte el cable de alimentación a la toma de corriente de la pared y
encienda el PC.
Siga las instrucciones que aparecen en la pantalla para instalar el
sistema operativo y los controladores.
E
b Para que el PC funcione correctamente, puede que tenga que instalar
aplicaciones y utilidades para dispositivos tales como unidades de
hp pc
image engineer -
CD-RW y DVD, que se incluyen en los CDs suministrados.
image creation and
recovery cd-rom
Boot on this cd-rom to
W2K - DT and NT4 - DT SP6 - English
c Para recuperar su sistema operativo o instalar una versión inferior del
mismo, utilice el CD-ROM de creación y recuperación de imágenes
hp p/n : 5970-0510-EN
y el CD-ROM Image Library & Diagnostics
connecting devices
2
PS/2
PS/2
operating system hp pc
backup cd-rom 1/2 image engineer -
image creation and
recovery cd-rom
Boot on this cd-rom to
start the recovery process. W2K - DT and NT4 - DT SP6 - English
W2K - DT and NT4 - DT SP6 - English
hp p/n : 5970-0510-EN
hp p/n : 5970-0510-EN
commercial computer software
This cd-rom contains system recovery
commercial computer software software for backup purposes only. The performance of this software is
the sole responsibility of HP. Carefully
This cd-rom contains system recovery software for backup purposes only. read the software license agreement
The performance of this software is the software. For regional support in the documentation before using
the sole responsibility of HP. Carefully read the software license agreement information, refer to the paper operating system hp pc
in the documentation before using documentation. backup cd-rom 1/2 image engineer -
the software. For regional support information, refer to the paper image creation and
documentation. Portions © 1985-2000 Microsoft Corporation. recovery cd-rom
© All rights reserved. Copyright 2001 Hewlett-Packard Boot on this cd-rom to
© 1985-2000 Microsoft Corporation. Company start the recovery process. W2K - DT and NT4 - DT SP6 - English
Copyright 2001 Hewlett-Packard
hp p/n : 5970-0510-EN
more information
4
Image
provided with
www.hp.com/go/vectrasupport
et le CD Image Library &
finden Sie die benötigte
blu e l'Image Library
azul
suministrados con el PC.
F connexions
I collegamenti
LAN*
parallel
serial line out mic
line in
600
32 electret
F autres informations
altre informazioni
I
Go to www.hp.com/go/vectrasupport: for the latest manuals, downloads
and information.
Go to hp instant support
Run e-DiagTools to solve problems: reboot the PC, press F8 and select
e-DiagTools from the Boot Center menu.
www.hp.com/go/instantsupport
F
D
I
E
D Geräte anschließen
E conexión de dispositivos
* If you have an add-on LAN card, connect the
network cable to the card
monitor
* Si votre PC est équipé d'une carte réseau,
connectez le câble réseau à cette carte.
* Wurde eine weitere LAN-Karte installiert,
schließen Sie das Netzwerkkabel dort an
* Per le schede LAN add-on, collegare il cavo di
rete alla scheda
* Si tiene una tarjeta de LAN añadida, conecte el
cable de red a la tarjeta
USB x 4
D weitere Informationen
más información
E
: for web troubleshooting, diagnostics and solutions.
Visitez le site www.hp.com/go/vectrasupport : pour les manuels, les
informations et les fichiers à télécharger les plus récents.
Allez sur hp instant support : pour un dépannage en ligne du PC,
des diagnostics et des solutions.
Exécutez e-DiagTools pour résoudre les problèmes : réamorcez le PC,
appuyez sur F8 et sélectionnez eDiagTools dans le menu Boot Center.
Infos unter www.hp.com/go/vectrasupport zu: aktuellen Handbüchern,
Downloads und weiteren Themen.
hp instant support : bietet automatische Diagnose, Fehlerbehebung und
Softwarelösungen
e-DiagTools zur Fehlerbehebung starten: PC neu starten und nach
Aufforderung F8 drücken. Danach "e-DiagTools" im Menü "Boot Center" auswählen.
Visitare il sito to www.hp.com/go/vectrasupport: per i manuali, i
download e le informazioni aggiornati.
Visitare hp instant support : per l'individuazione dei problemi via Web, la
diagnostica e le soluzioni.
Eseguire e-DiagTools per risolvere i problemi: riavviare il PC, premere F8 e
selezionare e-DiagTools nel menu Boot Center.
Vaya a www.hp.com/go/vectrasupport: para obtener los últimos manuales,
descargas e información.
Vaya a hp instant support : para obtener resolución de problemas en la
web, soluciones y diagnósticos.
Ejecute e-DiagTools para resolver los problemas: reinicie el PC, oprima F8
y seleccione e-DiagTools desde el menú Boot Center.