Before Starting E-Diagtools - HP Brio BA300 User Manual

2 Starting e-Diagtools

Before Starting e-Diagtools

Before Starting e-Diagtools
This section applies to HP Business PCs and Workstations. If you have an HP Notebook
PC, you can ignore this section.
Before you start e-Diagtools, do the following:
1 Enter the computer's BIOS Setup program.
To enter the Setup program on new HP Business PCs, restart the computer, press
•
when the logo screen appears, then press
F8
To enter the Setup program on other HP computers (including HP Notebook PCs),
•
restart the computer and press
2 If present, ensure all
or
Enabled Unlocked
3 If you are using a CD-ROM to run e-Diagtools, ensure the option to start from the
CD-ROM is enabled and the CD-ROM is configured to be the first device to boot from.
After running e-Diagtools, you can restore the original Setup values on your computer.
18 English
when the HP logo appears.
F2
Hardware Protection
.
.
F2
items in the
Security
menu are set to