Solving Network Problems - HP Blade Blade Troubleshooting Manual

Solving Network Problems

Solving Network Problems
Problem
Wake-on-LAN feature is
not functioning.
Network driver does
not detect network
controller.
Troubleshooting Guide
Some common causes and solutions for network problems are listed
in the following table. These guidelines do not discuss the process of
debugging the network cabling.
Cause
Wake-on-LAN is not
enabled.
Network controller is
disabled.
Incorrect network driver.
www.hp.com
Troubleshooting Without Diagnostics
Solution
Enable Wake-on-LAN.
1. Select Start > Control
Panel.
2. Double-click Network
Connections.
3. Double-click Local Area
Connection.
4. Click Properties.
5. Click Configure.
6. Click the Power
Management tab, then
select the check box to Allow
this device to bring the
computer out of standby.
1. Run Computer Setup and
enable network controller.
2. Enable the network controller in
the operating system via Device
Manager.
Check the network controller
documentation for the correct driver
or obtain the latest driver from the
manufacturer's Web site.
2–33