Connection; Connecting To The Network; Connecting To Lan; Assigning An Ip Address Using Epsonnet Config - Epson LQ-780N Network Manual

Network Guide

Connection

This chapter explains the environment or procedure to connect the printer to the network.

Connecting to the Network

Connecting to LAN

Connect the printer to the network by Ethernet.
Related Information
"Connecting to the Network Using the Installer" on page 18
&

Assigning an IP Address Using EpsonNet Config

Assign an IP address to the printer using EpsonNet Config.
Installing EpsonNet Config
When using EpsonNet Config, run the installer from the software disc supplied with the printer and follow the
on-screen instructions.
Running EpsonNet Config
Select All Programs > EpsonNet > EpsonNet Config SE > EpsonNet Config.
Note:
If the firewall alert appears, allow access for EpsonNet Config.
Setting an IP address
A
Turn on the printer.
B
Connect the printer to the network using an Ethernet cable.
C
Start EpsonNet Config.
A list of the printers on the network is displayed. It may take a while before they are displayed.
D
Double-click the printer you want to setup.
If you connect the printer to a network with an available DHCP function, the IP address is assigned using
the DHCP function, and then
Connection
is displayed.
14