Table of Contents
Advertisement
Network Guide
Items
IP Trap 1 to 4
Enable IP Trap X
Address
Community Name
Port Number
SNMPv3 Settings
Enable SNMPv3
User Name
Authentication Settings
Algorithm
Password
Confirm Password
Encryption Settings
Algorithm
Password
Confirm Password
Context Name
Related Information
"Controlling Protocols" on page 28
&
"Protocols you can Enable or Disable" on page 29
&
SSL/TLS Communication with the Printer
When the server certificate is set using SSL/TLS (Secure Sockets Layer/Transport Layer Security) communication
to the printer, you can encrypt the communication path between computers. Do this if you want to prevent remote
and unauthorized access.
Security Settings
Setting value and Description
Select to enable IP traps 1, 2, 3, or 4.
Enter the IP address for the Trap Destination.
Enter a community name. You can enter up to 32 single-byte alphanumeric
characters, spaces, and the following symbols. ! $% & '() * +,-.:; =? @ ^ _ ~
Set the port number of the host that receives the Trap in decimal numbers of 0 to
65535.
SNMPv3 is enabled when the box is checked.
Enter between 1 and 32 characters using 1 byte characters.
Select an algorithm for an authentication for SNMPv3.
Enter the password for an authentication for SNMPv3. Enter between 8 and 32
characters in ASCII (0x20-0x7E). If you do not specify this, leave it blank.
Enter the password you configured for confirmation.
Select an algorithm for an encryption for SNMPv3.
Enter the password for an encryption for SNMPv3.
Enter between 8 and 32 characters in ASCII (0x20-0x7E). If you do not specify this,
leave it blank.
Enter the password you configured for confirmation.
Enter within 32 characters or less in Unicode (UTF-8). If you do not specify this,
leave it blank. The number of characters that can be entered varies depending on
the language.
32
Advertisement
Table of Contents
