Table of Contents
Advertisement
Network Guide
Group Policy Setting Items
Items
Enable this Group Policy
Access Control
Local Address(Printer)
Remote Address(Host)
Method of Choosing Port
Security Settings
Settings and Explanation
You can enable or disable a group policy.
Configure a control method for traffic of IP packets.
Permit Access
Select this to permit configured IP packets to pass
through.
Refuse Access
Select this to refuse configured IP packets to pass
through.
IPsec
Select this to permit configured IPsec packets to pass
through.
Select an IPv4 address or IPv6 address that matches your network environment. If
an IP address is assigned automatically, you can select Use auto-obtained IPv4
address.
Enter a device's IP address to control access. The IP address must be between 0
and 43 characters. If you do not enter an IP address, all addresses are controlled.
Note:
If an IP address is assigned automatically (e.g. assigned by DHCP), the connection
may be unavailable. Configure a static IP address.
Select a method to specify ports.
41
Advertisement
Table of Contents
