Table of Contents
Advertisement
Network Guide
Default Policy Setting Items
Items
IPsec/IP Filtering
Access Control
IKE Version
Authentication Method
Pre-Shared Key
Confirm Pre-Shared Key
Encapsulation
Remote Gateway(Tunnel Mode)
Security Settings
Settings and Explanation
You can enable or disable an IPsec/IP Filtering feature.
Configure a control method for traffic of IP packets.
Permit Access
Select this to permit configured IP packets to pass
through.
Refuse Access
Select this to refuse configured IP packets to pass
through.
IPsec
Select this to permit configured IPsec packets to pass
through.
Displays the IKE version.
Displays compatible authentication methods.
Enter a pre-shared key between 1 and 127 characters.
Enter the key you configured for confirmation.
If you select IPsec for Access Control, you need to configure an encapsulation
mode.
Transport Mode
If you only use the printer on the same LAN, select
this. IP packets of layer 4 or later are encrypted.
Tunnel Mode
If you use the printer on the Internet-capable network
such as IPsec-VPN, select this option. The header and
data of the IP packets are encrypted.
If you select Tunnel Mode for Encapsulation, enter a gateway address between
1 and 39 characters.
39
Advertisement
Table of Contents
