Table of Contents
Advertisement
Network Guide
Related Information
"Obtaining a CA-signed Certificate" on page 33
&
Importing a CA-signed Certificate
c
Important:
❏ Make sure that the printer's date and time is set correctly.
❏ If you obtain a certificate using a CSR created from Web Config, you can import a certificate one time.
A
Access Web Config and then select Network Security Settings. Next, select SSL/TLS > Certificate.
B
Click Import.
A certificate importing page is opened.
C
Enter a value for each item.
Depending on where you create a CSR and the file format of the certificate, required settings may vary.
Enter values to required items according to the following.
❏ A certificate of the PEM/DER format obtained from Web Config
- Private Key: Do not configure because the printer contains a private key.
- Password: Do not configure.
- CA Certificate 1/CA Certificate 2: Optional
❏ A certificate of the PEM/DER format obtained from a computer
- Private Key: You need to set.
- Password: Do not configure.
- CA Certificate 1/CA Certificate 2: Optional
❏
A certificate of the PKCS#12 format obtained from a computer
- Private Key: Do not configure.
- Password: Optional
- CA Certificate 1/CA Certificate 2: Do not configure.
D
Click OK.
A completion message is displayed.
Note:
Click Confirm to verify the certificate information.
Related Information
"Accessing Web Config" on page 20
&
"CA-signed Certificate Importing Setting Items" on page 36
&
Security Settings
35
Advertisement
Table of Contents
