Table of Contents
Advertisement
Network Guide
F
Set the printer driver.
❏ If the printer driver is already installed:
Select Manufacturer and Printers. Click Next.
❏ If the printer driver is not installed:
Click Have Disc and then insert the software disc supplied with the printer. Click Browse, and then
select the folder on the disc containing the printer driver. Make sure you select the correct folder. The
location of the folder may change depending on your operating system.
32 bit version of Windows: WINX86
64 bit version of Windows: WINX64
G
Follow the on-screen instructions.
When using the printer under the server / client connection (printer sharing using the Windows server), make the
sharing settings hereafter.
Related Information
"Sharing the Printer" on page 23
&
Checking the Port Configuration - Windows
Check if the correct port is set for the print queue.
A
Open the devices and printers screen.
Click start > Windows System > Control Panel > Hardware and Sound > Devices and Printers.
B
Open the printer properties screen.
Right-click the printer icon, and then click Printer properties.
C
Click the Ports tab, select Standard TCP/IP Port, and then click Configure Port.
D
Check the port configuration.
❏ For RAW
Check that Raw is selected in Protocol, and then click OK.
❏ For LPR
Check that LPR is selected in Protocol. Enter "PASSTHRU" in Queue name from LPR Settings. Select
LPR Byte Counting Enabled, and then click OK.
Sharing the Printer
When using the printer under the server / client connection (printer sharing using the Windows server), set up the
printer sharing from the print server.
A
Select Control Panel > View devices and printers on the print server.
Function Settings
23
Advertisement
Table of Contents
