Bosch HES7282U Use And Care Manual page 21

Bridge Element Control Knob
(some models)
Bridge element activated with
front single element:
Rear Single Element
Bridge Element with
Rear Single Element
Surface Elements Disabled During
Self Clean (some models)
To turn on all three elements, Push in and turn the control knob to the
Turn knob left or right to set the heat level.
Inner
Element
Only
The bridge element connects two single elements to create one long cooking sur-
face.
Depending on the model, the bridge element is either activated in conjunction with
the front single element (
knob on your appliance to determine your configuration.
Turn ON the bridge element and the small element together
1. Push in on the control knob and turn clockwise to the desired heat setting.
Tip: To complete the connection and create an even longer cooking surface ,
turn ON the other single element, too.
To use the single element without bridge
1. Turn the knob counterclockwise.
Element Location
Two or more surface elements are automatically disabled during Self-Clean
Operation only. This is normal. Once the Self-Clean cycle is complete and the
oven has cooled, the elements become operable once again.
WARNING:
To avoid risk of personal injury, do not operate the cook top and
ensure that all surface controls are turned off while the self clean
cycle is operating.
Inner and Middle Element
Figure 11: Triple Element Knob
) or the rear single element (
Bridge element activated with
rear single element:
Front Single Element
Bridge Element with
Front Single Element
Figure 12: Bridge Element Knob
Operation - Cooktop
icon.
All Three
Elements
). Refer to the control
Element Location
English 17