Table of Contents
Advertisement
Pour the descaling solution into the water tank and
7.
slide the water tank in fully.
Close the tank cover.
8.
Touch the u button.
9.
The appliance will now be descaled. The remaining
time counts down on the display. An audible signal
will sound once descaling has finished.The
appliance pauses.
Open the tank cover.
10.
Remove the drip tray, empty it and slide it back in.
11.
Remove the water tank, rinse it thoroughly, fill it with
12.
fresh water and slide it back in.
Close the tank cover.
13.
Touch the u button.
14.
The appliance will now be rinsed twice automatically.
An audible signal will sound once the rinse cycles
have finished. Empty the drip tray.
Rinsing
To ensure that your appliance stays clean, you can
pump water through the pipe system. The water is then
drained to the waste water tank.
After rinsing, there can be dissolved lime
Note:
particles in the waste water tank. This is normal and
does not affect operation.
Starting
Use the function selector to select the rinse cycle ,.
1.
The duration of the programme will be displayed.It
cannot be changed.
Open the tank cover.
2.
Remove and empty the waste water tank.
3.
Slide the empty waste water tank in fully.
4.
Remove water tank and drain any residual water.
5.
Rinse out water tank thoroughly and fill with fresh
water.
Slide the water tank in fully.
6.
Close the tank cover.
7.
Touch the u button.
8.
Water is pumped through the pipes.The time
remaining will count down on the display. An audible
signal will sound once this time has elapsed. Empty
the waste water tank.
Subsequent cleaning
Carry out the following steps after every descaling
programme or rinse cycle:
Open the tank cover.
1.
Empty, clean and dry the waste water tank and water
2.
tank.
Turn the function selector to the off position.
3.
The process is complete and the appliance is ready
for use again.
Emptying the waste water tank
With the cleaning functions, the residual water is
collected in the waste water tank. Then empty and dry
the waste water tank.
Caution!
Do not dry the waste water tank in the hot cooking
■
compartment. This will damage the waste water tank.
Do not clean the waste water tank in the dishwasher.
■
This will damage the waste water tank.
Briefly press on the centre of the tank cover.
1.
The tank cover opens. The waste water tank and
water tank can now be accessed.
Remove the waste water tank from the tank recess.
2.
Open the lid for the waste water tank.
3.
Empty the waste water tank.
4.
Insert the waste water tank back into the tank recess
5.
and slide it in fully.
Close the tank cover.
6.
The appliance is ready to use.
Cleaning function
en
31
Advertisement
Table of Contents
