Controls And Adjustments; Default Dip Switch Settings - Hoshizaki F-500BAJ Service Manual

B. Controls and Adjustments
Dip switches are factory set. Failure to maintain factory settings may adversely
affect performance and warranty coverage. For more information, contact your
Hoshizaki Certified Service Representative.

1. Default Dip Switch Settings

The S1 dip switch settings are factory-set to the following positions:
Dip Switch No.
F-300BAJ
F-500BAJ
NOTICE
1 2 3 4
OFF OFF OFF OFF OFF OFF OFF
Normally off (factory use)
Mechanical Shutdown Delay
Periodic Agitation (DCM-270 only) and Ice Purge Timer
Bin Control Selector
Continuous Dispensing Timer
(DCM models only, do not adjust on modular icemakers)
Drain Frequency Control
infrared sensor Shutdown Delay
32
5 6 7 8
ON
9 10
OFF OFF