Hoshizaki F-500BAJ Service Manual page 40

Seal Bolts
Inspect for leakage around seal bolts.
Tighten (11.1 ft-lb/15 N·m) or replace
as necessary.
Seal bolts must be replaced once
removed because seal material is
one-time use only. Loctite 243 must be
applied to seal bolt threads when seal
bolts are replaced.
Hex Bolt and Washer
Socket Head Cap Screw and Split
Lock Washer
Fig. 5
Evaporator Assembly
Packing
Evaporator
Mechanical Seal
Gear Motor
Flaker
Cutter
Upper Bearing
(pressed into
extruding head)
Flaker Extruding
Head
Auger
O Ring
Evaporator Flange
Socket Head Cap Screws
and Split Lock Washer
O Ring
Lower Bearing
(pressed into lower housing)
Lower Housing
Hex Bolt and Washer
Spline Coupling
Socket Head Cap Screw and Split
Lock Washer
40