Entering Custom Sprt Coefficients - Fluke 525B User Manual

Entering Custom SPRT Coefficients

To enter coefficients for a custom SPRT:
1. Press  to enter RTD mode.
2. If necessary, press   for RTD IN mode.
3. Press  until you get the
4. Enter the
5. Enter the
6. Enter the nominal resistance (R
7. Enter the temperature coefficients and press . Press   to enter a
positive or negative exponent for the coefficient.
RTD IN SPRT
and press .
MIN TEMP
and press .
MAX TEMP
display and press .
) and press .
0
Using Input Mode
3
Using Input Mode
3-9