Entering Custom Sprt Coefficients - Fluke 525A User Manual

Entering Custom SPRT Coefficients

To enter coefficients for a custom SPRT
1. Press C to enter RTD mode.
2. If necessary, press I 7 for RTD IN mode.
3. Press E until you get the
4. Enter the
5. Enter the
6. Enter the nominal resistance (R
7. Enter the temperature coefficients and press J. Press I H to enter a
positive or negative exponent for the coefficient.
RTD IN SPRT
and press J.
MIN TEMP
and press J.
MAX TEMP
display and press J.
) and press J.
0
Using Input Mode
3
Using Input Mode
3-9