Entering and Using Custom RTDs
The USR_DEF RTD type allows the Calibrator to simulate a custom curve-fit
RTD.
To enter the coefficients for custom RTDs:
1. Press to select RTD mode.
2. Press until you get the
3. Press to enter custom RTD information.
the Calibrator display. You can store up to five custom RTD definitions on the
Calibrator.
4. Press a number key to specify the RTD you want to define (1-5).
5. When the
coefficient.
6. Enter the
MIN TEMP
7. Enter the
MAX TEMP
8. Enter the nominal resistance (R
9. Enter the temperature coefficients and press . Press to enter a
positive or negative exponent for the coefficient.
To use a custom RTD:
1. Press to enter RTD mode.
2. Press until you get the
3. Press to use custom RTD information.
Calibrator display. You can store up to five custom RTD definitions on the
Calibrator.
4. Press a number key to select the RTD you want to use (1-5).
5. When the
selected custom RTD.
USR_DEF
display appears, press to define a custom RTD
SET/RECALL
and press .
and press .
0
USR_DEF
display appears, press to recall and use the
SET/RECALL
display.
RTD CUSTOM (1-5)
) and press .
display.
RTD CUSTOM (1-5)
Using Input Mode
3
Using Input Mode
appears on
appears on the
3-7