HP Pavilion XZ335 Reference Manual page 93

CAUTION
WARNING
When opening the keyboard, be careful not to pull on the cable connecting the
keyboard to the notebook.
8. Raise the top edge of the keyboard, then fold it onto the front of the case.
Do not touch the metal surfaces inside the notebook until they have cooled off.
They could be very hot if the notebook was running recently.
Do not touch the electronic components inside the notebook. Static electricity can
permanently damage them.
9. Release the two latches at the sides of the RAM module by pressing them outward, so
that the free edge of the module pops up.
10. Pull the module out of the connector.
11. Carefully insert the edge of the new RAM module into the connector at about a 30°
angle until it is fully seated. Then press down on both sides until the latches snap
closed.
Add-On Devices
Installing Additional RAM
Reference Guide 93