Table of Contents
Advertisement
Before removing the processor, follow these steps:
1.
Memory module/wireless module compartment cover (see
2.
Hard drive (see
3.
Optical drive (see
4.
Keyboard (see
5.
Top cover (see
6.
System board (see
7.
Fan/heat sink assembly (see
Remove the processor:
1.
Turn the processor locking screw (1) one-half turn counterclockwise, until you hear a click.
2.
Lift the processor (2) straight up, and remove it.
NOTE:
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Display assembly
NOTE:
The display assembly spare part kit includes a display panel cable, webcam/microphone
module and cable, and 2 wireless antenna cables and transceivers.
Description
For use only with computer models equipped with WLAN and WWAN capability (includes 2 WWAN antenna cables and
transceivers):
●
14.5-in LED, HD, BrightView display assembly in black cherry
●
14.5-in LED, HD, BrightView display assembly in champagne
78
Chapter 4 Removal and replacement procedures
Hard drive on page
Top cover on page
Keyboard on page
Top cover on page
System board on page
Fan/heat sink assembly on page
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
53)
62)
59)
62)
71)
Memory module on page
74)
Spare part number
614175-001
614178-001
45)
ENWW
Advertisement
Table of Contents
