Table of Contents
Advertisement
Description
●
14.5-in LED, HD, BrightView display assembly in midnight blue
●
14.5-in LED, HD, BrightView display assembly in Sonoma red
●
14.5-in LED, HD, BrightView display assembly in shell white
For use only with computer models not equipped with WWAN capability:
●
14.5-in LED, HD, BrightView display assembly in black cherry
●
14.5-in LED, HD, BrightView display assembly in champagne
●
14.5-in LED, HD, BrightView display assembly in midnight blue
●
14.5-in LED, HD, BrightView display assembly in Sonoma red
●
14.5-in LED, HD, BrightView display assembly in shell white
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Memory module/wireless module compartment cover (see
b.
Hard drive cover (see
c.
Keyboard (see
d.
Top cover (see
Remove the display assembly:
1.
Disconnect the display panel cable (1) from the system board and release the display panel cable
from the routing clip (2) built into the fan/heat sink assembly.
ENWW
Battery on page
44), and then remove the following components:
Hard drive on page
Keyboard on page
59)
Top cover on page
62)
Memory module on page
53)
Component replacement procedures
Spare part number
615385-001
614176-001
614177-001
598227-001
606872-001
615384-001
606870-001
606871-001
45)
79
Advertisement
Table of Contents
