Table of Contents
Advertisement
Speakers
Description
Speakers (include cable)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Memory module/wireless module compartment cover (see
b.
Hard drive cover (see
c.
Keyboard (see
d.
Top cover (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Remove the Phillips PM2.5×6.0 screw (2) that secures the left speaker to the base enclosure.
3.
Remove the left (3) and right speakers (4).
Reverse this procedure to install the speakers.
ENWW
Battery on page
44), and then remove the following components:
Hard drive on page
Keyboard on page
59)
Top cover on page
62)
Memory module on page
53)
Component replacement procedures
Spare part number
606891-001
45)
67
Advertisement
Table of Contents
