HP OmniBook XE3 Reference Manual page 123

Set Supervisor
Password
Password Required
to Boot
Floppy Boot
Power Menu
Intel SpeedStep
Technology
Auto Turn-On on
Dock
Boot Menu
Exit Menu
Saving Changes and
Exit
Discarding Changes
and Exit
Get Default Values
Sets, changes, or clears supervisor
password. This password protects
BIOS Setup settings.
Sets whether a user password is
required when the computer boots.
Controls permission to boot system
from floppy disk drive.
Sets CPU high-speed/low-speed
mode for AC and battery operation:
boot at high speed with AC, otherwise
low (Auto); no runtime support, boot at
low speed (Disabled); boot at low
speed (Battery Optimized); boot at
high speed (Max. Performance); or
boot at low speed with AC, otherwise
high (Reverse).
Enables or disables automatic system
turn-on when computer is docked.
Indicates boot order of drives (change
order with F5 and F6 keys).
Saves Setup changes to CMOS,
exits, and reboots.
Discards Setup changes since last
save, exits, and reboots. Does not
affect security, date, or time changes.
Restores default settings, stays in
Setup. Does not affect security, date,
or time changes.
Specifications and Regulatory Information
Hardware and Software Specifications
Enabled
Enabled
Default
Auto
Enabled
Default
Floppy Drive
Hard Drive
CD-ROM/DVD Drive
Reference Guide 123