Hardware And Software Specifications; Bios Setup Utility Options - HP OmniBook XE3 Reference Manual

Hardware and Software Specifications

Main Menu
BIOS Revision
System Time
System Date
Floppy Drive
Internal Hard Disk
Quiet Boot
Video Display Device
Video Expansion
Specifications and Regulatory Information
Hardware and Software Specifications
For the most up-to-date information on HP notebook PC specifications, go to the HP
notebook website at www.hp.com/notebooks.

BIOS Setup utility options

The pointing devices are not active in the BIOS Setup utility. Press the Right and Left
arrow keys to move from one menu to another. Press the Down and Up arrow keys to
move among parameters in a menu. Press F5 or F6 to move through values for the current
parameter or press Enter to change a setting. See the tables below for more information.
Shows the current BIOS version.
Sets the time using 24-hour format.
Values set take effect immediately.
Sets the date using mm/dd/yyyy
format.
Sets the floppy drive type.
Sets the hard disk drive size.
When enabled, hides summary of
power-on self-test and messages
during boot.
Switches between sending video
signals to both the built-in LCD display
and an external CRT display (Both)
and automatically switching to the
external CRT if one is attached (Auto).
When enabled, expands video image
to cover entire LCD at lower
resolutions.
120 Reference Guide
Default
Detected
automatically.
Detected and set
automatically.
Detected and set
automatically.
Enabled
Auto
Disabled