HP OmniBook XE3 Reference Manual page 122

Specifications and Regulatory Information
Hardware and Software Specifications
Base I/O address
DMA channel
Parallel Port
Mode
Base I/O address
Interrupt
DMA channel
LCD Status Panel
Display
LCD Status Panel
Date Format
LCD Status Panel
Time Format
Security Menu
User Password Is
Supervisor Password
Is
Set User Password
122
When IR port is enabled, sets the I/O
address and interrupt.
When FIR mode is enabled, sets the
DMA channel.
Sets how the parallel port is
configured—by the user (Enabled),
automatically (Auto), or inactive
(Disabled).
When parallel port is enabled, sets the
port to Normal, Bi-directional, ECP, or
EPP mode.
When EPP mode is not enabled, sets
the I/O address.
Sets the interrupt.
When ECP mode is enabled, sets the
DMA channel.
Enables or disables display of the
status panel.
Set date format on the status panel.
Set time format on the status panel.
Shows if a user password is set.
Shows if an supervisor password is
set.
Sets, changes, or clears user
password, after supervisor password
is set. Password length can be no
longer than 8 characters, 0-9, A-Z.
Reference Guide
2F8 IRQ3
DMA 0
Enabled
ECP
378
IRQ 7
DMA 3
Enabled
mm/dd/yy
(month/date/year)
hh:mm
(24-hour format)
Default
Clear
Clear