Pc Card Problems - HP OmniBook XE3 Reference Manual

Solving Problems with Your Computer
Troubleshooting Techniques
3. Select the One-Touch buttons tab.
4. Click on the button of the key you want to reconfigure.
5. Select the application or website you want associated with the button. (See "To
configure a One-Touch button" for more detail.)
6. Click Done, then OK.
If the onscreen display does not appear when pressing a One-Touch button
Check that the Onscreen Display is enabled.
1. Click Start, Settings, Control Panel.
2. Double-click Keyboard.
3. Select the One-Touch buttons tab.
4. Click Change Onscreen Display.
5. Check Enable if it is not checked.
6. Click Done, then OK.

PC card problems

If the notebook doesn't recognize a PC card
Remove and reinsert the PC card.
If the card requires an IRQ, check that there is one available. Look in Device
Manager, Properties, Interrupt Request (IRQ).
Check the HP notebook website for information about supported PC cards.
Try the card in another computer.
Reboot the computer.
If an I/O card stops communicating properly
The card may have been reset if the computer in on standby or turned off. Exit any
applications, then remove and reinsert the card.
102 Reference Guide