To Replace The Battery - HP OmniBook 800 - Notebook PC User Manual

Hp omnibook 800 - 5/166 user guide windows for workgroups
Hide thumbs Also See for OmniBook 800 - Notebook PC:
Table of Contents

Advertisement

OmniBook Charging Light
Color
Off
Orange
Green
Red
Hint
Optimum charging. To get the longest battery operating time, wait until the Battery
indicator in the Status Panel appears full. The battery normally reaches 100% about
1 hour after the charging light turns green.
You can continue working while the battery is charging. The charging rate is not
affected by using the computer.

To replace the battery

You may never need to remove the rechargeable battery in ordinary use. Just
connect the ac adapter to the OmniBook and recharge the battery while you work.
However, you can replace a low battery with another that is more fully charged.
Caution
If you have the ac adapter plugged in when you remove the battery, do not
disconnect it while the battery is out. If you do, your current session and any
unsaved data will be lost.
Use only a Hewlett-Packard lithium-ion (Li-Ion) battery.
1. Important
Save your work. Then press the On/Off key to stop the OmniBook.
2. If available, plug in the ac adapter.
3. Release the two latches on the battery on the bottom of the case, then remove
the battery.
Meaning for Battery
AC adapter not connected.
Charging.
Charging 90% - 100%.
Bad battery or missing battery.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnibook 800

Table of Contents