Replacing Memory Modules - HP Envy 14-2100 Getting Started

Replacing memory modules

The computer has one memory module compartment. The capacity of
the computer can be upgraded by replacing the existing memory module
in the primary memory module slot.
WARNING!
equipment, unplug the power cord and remove all batteries before
installing a memory module.
CAUTION:
components. Before beginning any procedure, ensure that you are
discharged of static electricity by touching a grounded metal object.
To replace a memory module:
CAUTION:
Shut down the computer before adding or replacing memory modules.
Do not remove a memory module while the computer is on, in the Sleep
state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the
computer on by pressing the power button. Then shut down the
computer through the operating system.
1. Save your work and shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Unplug the power cord from the AC outlet.
4. Remove the battery cover and battery.
NOTE:
refer to
5. Remove the 5 memory module compartment cover screws (1).
44 Chapter 5 Maintenance
To reduce the risk of electric shock and damage to the
Electrostatic discharge (ESD) can damage electronic
To prevent information loss or an unresponsive system:
For instructions on removing the battery cover and battery,
Removing the battery on page 32.