HP Envy 14-2100 Getting Started page 57

b.
8. Insert a new memory module:
CAUTION:
memory module by the edges only. Do not touch the components on
the memory module.
a.
b.
46 Chapter 5 Maintenance
Grasp the edge of the memory module (2), and then gently pull
the memory module out of the memory module slot.
To prevent damage to the memory module, hold the
CAUTION:
memory module by the edges only. Do not touch the
components on the memory module.
To protect a memory module after removal, place it in an
electrostatic-safe container.
To prevent damage to the memory module, hold the
Align the notched edge (1) of the memory module with the tab in
the memory module slot.
With the memory module at a 45-degree angle from the surface
of the memory module compartment, press the module (2) into
the memory module slot until it is seated.