Technical Specifications; Servicing; Maintenance Procedures; Engine Oil Change - Chicago Electric 65588 Set Up, Operating, And Servicing Instructions

Inverter gas generator
Table of Contents

Advertisement

of children's reach according to the
Storage instructions in this manual.
tecHnIcaL
specIFIcatIons
Engine Type
Type
Fuel
Capacity
Type
Engine Oil
Capacity
Type
Spark Plug
Gap
Engine
Maximum
Speed

servIcIng

FroM accIdentaL
startIng:
turn the power switch of the
equipment to its "oFF"
position, wait for the engine to
cool, and disconnect the
spark plug wire(s) before
performing any inspection,
maintenance, or cleaning
procedures.
FroM equIpMent FaILure:
do not use damaged
equipment. If abnormal noise,
vibration, or excess smoking
occurs, have the problem
corrected before further use.
SKU 65588
For technical questions, please call 1-800-444-3353.
Air Cooled, 4 Cycle, OHV,
Gas Engine.
89+ octane unleaded
gasoline
0.6 Gallons
SAE 30W (above 32° F)
SAE 10W30 (at 32° F or
below)
.2 Quarts
Standard CR4HSB
.024" to .028"
6500 RPM
to prevent
serIous InjurY
to prevent
serIous InjurY

Maintenance procedures

Many maintenance procedures,
including those not detailed
in this manual, will need to
be performed by a qualified
technician for safety. If you
have any doubts about your
ability to safely service the
equipment or engine, have a
qualified technician service the
equipment instead.
note: Warranty is void if proper mainte-
nance and servicing procedures are
not followed.

engine oil change

cautIon! Oil is very hot during opera-
tion and can cause burns. Wait for
engine to cool before changing oil.
1.
First remove Housing Cover (6).
2.
Place a drain pan (not included) un-
derneath the crankcase's drain plug.
3.
Remove the drain plug and, if pos-
sible, tilt the crankcase slightly to help
drain the oil out. Recycle used oil.
4.
Replace the drain plug, (check the
sealing "O" Ring condition and re-
place if damaged) and tighten the
drain plug.
5.
Refill the oil to the proper level follow-
ing the instructions under the Starting
the Engine section.
air Filter element Maintenance
1.
Wipe off the Air Cleaner (1C) cover,
and remove it.
Page 11

Advertisement

Table of Contents
loading

Table of Contents