Removing Drivelock Protection - HP Compaq NC6110 Hardware And Software Manual

Removing DriveLock Protection

To access the DriveLock settings in Computer Setup:
1. Shut down the notebook. If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power/standby button, and then shut down the
notebook through the operating system.
2. Be sure that the hard drive is inserted into the notebook
(not into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on or restarting the
computer, and then pressing
Based Setup" message is displayed in the lower-left corner of
the screen.
❏
❏
4. Use the arrow keys to select Security > DriveLock
passwords, and then press
5. Use the arrow keys to select the location of the hard drive,
and then press
6. Toggle the Protection field to Disable, and then press
7. Type your master password in the Old password field. Then
press
8. To save your preferences, use the arrow keys to select
File > Save Changes and Exit. Then follow the instructions
on the screen.
Your preferences are in effect when the notebook restarts.
Hardware and Software Guide
To change the language, press
For navigation instructions, press
f10
.
f10
f10
.
enter
.
while the "F10 = ROM
.
f2
.
f1
Security
.
f10
7–17