HP Compaq NC6110 Hardware And Software Manual page 121

Hardware Components
Removing an Optical Disc (With Power)
If power is available:
1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release the
media tray, and then pull the tray 2 out until it is fully
extended.
3. Remove the disc 3 from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. Handle
the disc by the edges, not the flat surfaces. If the media tray is
not fully extended, tilt the disc as you remove it.
4. Close the media tray and place the disc in a protective case.
5–10 Hardware and Software Guide