Setting A Multiboot Express Prompt - HP Compaq NC6110 Hardware And Software Manual

Setting a MultiBoot Express Prompt

To set the notebook to display the MultiBoot startup location
menu each time the notebook is started or restarted:
1. Open Computer Setup by turning on or restarting the
notebook, and then pressing
Setup" message is displayed in the lower-left corner of the
screen.
❏
❏
2. Use the arrow keys to select the Advanced menu > Boot
Options, and then press
3. In the Express Boot Popup Delay (Sec) field, select the length
of time in seconds that you want the notebook to display the
startup location menu before it defaults to the current
MultiBoot setting (when 0 is selected, the Express Boot
startup location menu is not displayed.)
4. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit. Then
follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
Hardware and Software Guide
To change the language, press
For navigation instructions, press
while the "F10 = ROM Based
f10
.
f2
.
f1
.
enter
MultiBoot
8–7