Turning On, Turning Off, Enabling And Disabling The 802.11 And Bluetooth Wireless Devices - HP Compaq NC6110 Hardware And Software Manual

Turning On, Turning Off, Enabling and
Disabling the 802.11 and Bluetooth
Wireless Devices
The wireless button enables and disables 802.11 and Bluetooth
wireless devices in conjunction with Wireless Assistant. By
default, the 802.11 and Bluetooth wireless devices and wireless
light are turned on when you turn on the notebook.
✎
Turning on a wireless device does not automatically create a
WLAN or connect you to a WLAN. For information on setting up
a WLAN refer to the
(Select Models Only)"
The 802.11 and Bluetooth wireless devices have 2 power states:
■
Enabled
■
Disabled
You can enable and disable wireless devices in Computer Setup.
For more information about using Computer Setup to control the
802.11 and Bluetooth wireless devices, refer to
"Computer Setup."
device with the wireless button.
When the wireless devices are enabled in Computer Setup and
with the wireless button, you can use Wireless Assistant to turn
on and off the devices individually.
Hardware and Software Guide
"Wireless Local Area Network
section in this chapter.
You can also enable and disable a wireless
Wireless
Chapter 9,
6–13