Switching Displays (Fn+F4); Viewing Battery Charge Information (Fn+F8) - HP Compaq NC6110 Hardware And Software Manual

Switching Displays (fn+f4)

The
fn+f4
connected to the external monitor connector or the S-Video-out
jack (select models only) on the notebook. For example, if an
external monitor is connected to the notebook, pressing the
hotkey multiple times alternates the image between the notebook
display, the external monitor display, and a simultaneous display
on both the notebook and the monitor.
Most external monitors receive video information from the
notebook using the external VGA video standard. The
hotkey can also alternate images among other devices receiving
video information from the notebook.
The following 4 video transmission types, with examples of
devices that use them, are supported by the
■
LCD (notebook display)
■
External VGA (most external monitors)
■
S-Video (televisions, camcorders, VCRs, and video capture
boards with S-Video-in jacks, on select models)
■
Composite video (televisions, camcorders, VCRs, and video
capture boards with composite-video–in jacks) when
connected to an optional docking device (select models only)

Viewing Battery Charge Information (fn+f8)

Press
fn+f8
packs. The display indicates which battery packs are charging and
reports the amount of charge remaining in each battery pack.
Battery pack locations are indicated by number:
■
Location 1 is the primary battery pack.
■
Location 2 is the optional travel battery pack.
Hardware and Software Guide
hotkey switches the image among display devices
to display charge information for all installed battery
Pointing Devices and Keyboard
hotkey:
fn+f4
fn+f4
fn+f4
3–9