Power-On Passwords; Setting Power-On Passwords - HP Compaq NC6110 Hardware And Software Manual

Power-On Passwords

A power-on password prevents unauthorized use of the notebook.
After this password is set, it must be entered each time the
notebook is turned on or restarted. A power-on password
■
Does not display as it is set, entered, changed, or deleted.
■
Must be set and entered with the same type of keys. For
example, a power-on password set with keyboard number
keys will not be recognized if you enter it with embedded
numeric keypad number keys.
■
Can include any combination of up to 32 letters and numbers
and is not case sensitive.

Setting Power-On Passwords

A power-on password is set, changed, or deleted in Computer
Setup.
To manage the password:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
Based Setup" message is displayed in the lower-left corner of
the screen.
❏
❏
2. Use the arrow keys to select Security > Power-On
password, and then press
❏
Hardware and Software Guide
To change the language, press
For navigation instructions, press
To set a power-on password, type the password in the
New password and Verify new password fields, and then
press .
f10
while the "F10 = ROM
f10
.
f2
.
f1
.
enter
Security
7–9