Table of Contents
Advertisement
Use the arrow keys to select Main > Save Changes and Exit, and then follow the on-screen
instructions.
Your changes go into effect when the computer restarts.
Entering a DriveLock password
Be sure that the hard drive is inserted into the computer (not into an optional docking device or
external MultiBay).
At the DriveLock Password prompt, type your user or master password (using the same kind of keys
you used to set the password), and then follow the on-screen instructions.
After 2 incorrect attempts to enter the password, you must shut down the computer and try again.
Changing a DriveLock password
To change a DriveLock password in Computer Setup, follow these steps:
1.
Turn on the computer, and then press
Volume Down button to enter the BIOS Startup Menu" message is displayed at the bottom of the
screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Security > Hard Drive Tools > DriveLock, and
then follow the on-screen instructions.
4.
Enter the BIOS Administrator password, and then follow the on-screen instructions.
5.
Use a pointing device or the arrow keys select Set DriveLock Password, and then follow the on-
screen instructions.
6.
Use the arrow keys to select an internal hard drive, and then follow the on-screen instructions.
7.
Use a pointing device or the arrow keys to select Change Password.
8.
When prompted, type your current password, and then follow the on-screen instructions.
9.
When prompted, type a new password, and then follow the on-screen instructions.
10.
When prompted, type the new password again to confirm, and then follow the on-screen
instructions.
11.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then follow the on-screen
instructions.
Your changes go into effect when the computer restarts.
Removing DriveLock protection
To remove DriveLock protection in Computer Setup, follow these steps:
1.
Turn on the computer, and then press
Volume Down button to enter the BIOS Startup Menu" message is displayed at the bottom of the
screen.
2.
Press
54
Chapter 9 Security
f10
to enter Computer Setup.
f10
to enter Computer Setup.
esc
or hold down the volume button while the "Hold the
esc
or hold down the volume button while the "Hold the
- Quick Links:
- Tablet Edge Components
Hide quick links:
Advertisement
Table of Contents
