Related Manuals
The followings are the manuals related to this manual. Use these manuals for reference.
Manual name
Cat. No.
NJ-series CPU Unit
W500
Hardware User's Manual
NJ/NX-series CPU Unit
W501
Software User's Manual
NJ/NX-series Instruc-
W502
tions Reference Manual
NJ/NX-series CPU Unit
W507
Motion Control User's
Manual
NJ/NX-series Motion
W508
Control Instructions Ref-
erence Manual
NJ/NX-series CPU Unit
W505
Built-in EtherCAT® Port
User's Manual
W506
NJ/NX-series CPU Unit
Built-in EtherNet/IP
Port
User's Manual
NJ/NX-series
W588
CPU Unit OPC UA
User's Manual
NJ/NX-series Database
W527
Connection CPU Units
User's Manual
NJ-series SECS/GEM
W528
CPU Units User's Man-
ual
NJ-series CPU Unit Hardware User's Manual (W500)
Model numbers
Application
NJ501-
Learning the basic specifi-
NJ301-
cations of the NJ-series
NJ101-
CPU Units, including intro-
ductory information, design-
ing, installation, and
maintenance. Mainly hard-
ware information is pro-
vided.
NX701-
Learning how to program
NX102-
and set up an NJ/NX-series
NX1P2-
CPU Unit. Mainly software
NJ501-
information is provided.
NJ301-
NJ101-
NX701-
Learning detailed specifica-
NX102-
tions on the basic instruc-
NX1P2-
tions of an NJ/NX-series
NJ501-
CPU Unit.
NJ301-
NJ101-
NX701-
Learning about motion con-
NX102-
trol settings and program-
NX1P2-
ming concepts.
NJ501-
NJ301-
NJ101-
NX701-
Learning about the specifi-
NX102-
cations of the motion control
NX1P2-
instructions.
NJ501-
NJ301-
NJ101-
NX701-
Using the built-in EtherCAT
NX102-
port on an NJ/NX-series
NX1P2-
CPU Unit.
NJ501-
NJ301-
NJ101-
NX701-
Using the built-in Ether-
NX102-
Net/IP port on an NJ/NX-
NX1P2-
series CPU Unit.
NJ501-
NJ301-
NJ101-
NX701-
Using the OPC UA.
NX102-
NJ501-100
NX701-20
Using the database connec-
NX102-
tion service with NJ/NX-
NJ501-20
series Controllers
NJ101-20
NJ501-1340
Using the GEM Services
with NJ-series Controllers.
Related Manuals
Description
An introduction to the entire NJ-series system is
provided along with the following information on
the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
The following information is provided on a Control-
ler built with an NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 language
specifications
The instructions in the instruction set (IEC 61131-3
specifications) are described.
The settings and operation of the CPU Unit and
programming concepts for motion control are
described.
The motion control instructions are described.
Information on the built-in EtherCAT port is pro-
vided. This manual provides an introduction and
provides information on the configuration, fea-
tures, and setup.
Information on the built-in EtherNet/IP port is pro-
vided. Information is provided on the basic setup,
tag data links, and other features.
Describes the OPC UA.
Describes the database connection service.
Provides information on the GEM Services.
39