Sd Memory Cards; Models And Specifications; Purpose - Omron CJ1W-ID Series User Manual

3 Configuration Units
3-2

SD Memory Cards

3-2-1

Models and Specifications

Refer to Specifications of Supported SD Memory Cards, Folders, and Files in the NJ/NX-series CPU
Unit Software User's Manual (Cat. No. W501) for details.
3-2-2

Purpose

You can use the SD Memory Card for the following applications.
• Read and write files in the SD Memory Card with instructions.
• Read and write files in the SD Memory Card from an FTP client on EtherNet/IP.
• Back up, restore, and verify data in the Controller.
• Transfer data from the SD Memory Card to the Controller when the power is turned ON.
Version Information
A CPU Unit with unit version 1.03 or later and Sysmac Studio version 1.04 or higher are required
to use the SD Memory Card backup functions and automatic transfer from SD Memory Cards.
3-10
NJ-series CPU Unit Hardware User's Manual (W500)