Lexus UX 250h 2020 Owner's Manual page 92

90
2-1. Instrument cluster
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
*3
: When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the power switch
off. If the vehicle is refueled without
turning the power switch off, the display
may not be updated.
G-force (F SPORT models)
■
Displays lateral G-forces on the vehi-
cle.
Acceleration G-force on the vehi-
A
cle
Current G-force value (analyzed
B
value of front/rear and left/right G-
forces)
Record of the maximum G-forces
C
This display is intended for use as a guide-
line. Depending on factors such as the road
surface condition, temperature and vehicle
speed, the display may not show the actual
condition of the vehicle.
 Resetting the record of maximum
G-forces
Press and hold "OK" of the meter control
switches to reset the record.
 Peak hold function
If lateral G-forces of 0.5 G or greater are
generated, the G-force value display will
turn amber and be held for 2 seconds.
Tire pressure
■
P.348
Units (F SPORT models)
■
The units of measure used can be
changed while driving.
Unlike the units setting performed on the
settings display, the units setting per-
formed on the drive information display
can be changed while driving.
Display OFF
■
Displays a blank screen.
Navigation system-linked dis-
play (if equipped)
Select to display the following naviga-
tion system-linked information.
 Route guidance to destination
 Compass display
Route guidance to destination display
■
When the route guidance to destination
display is enabled on the head-up display, it
will not be displayed on the multi-informa-
tion display. (P.93)
Audio system-linked display
Select to enable selection of an audio
source or track on the meter using the
meter control switches.
Driving support system informa-
tion display
Select to display the operational status
of the following systems: