152
4-1. Before driving
4-1.Before driving
Driving the vehicle
The specified procedures should be
observed to ensure safe driving:
Driving procedure
Starting the hybrid system
■
P.162
Driving
■
1
With the brake pedal depressed,
shift the shift lever to D. (P.168)
2
If the parking brake is in manual
mode, release the parking brake.
(P.173)
3
Gradually release the brake pedal
and gently depress the accelerator
pedal to accelerate the vehicle.
Stopping
■
1
With the shift lever in D, depress the
brake pedal.
2
If necessary, set the parking brake.
(P.173)
If the vehicle is to be stopped for an
extended period of time, shift the shift lever
to P. (P.168)
Parking the vehicle
■
1
With the shift lever in D, depress the
brake pedal.
2
If the parking brake is in manual
mode, set the parking brake
(P.173), and shift the shift lever to
P (P.168).
3
Press the power switch to stop the
hybrid system.
4
Lock the door, making sure that you
have the electronic key on your
person.
If parking on a hill, block the wheels as
needed.
Starting off on a steep uphill
■
1
Make sure that the parking brake is
set with the brake pedal depressed,
and then shift the shift lever to D.
2
Release the brake pedal and gently
depress the accelerator pedal.
3
Release the parking brake.
When starting off on a uphill
■
The hill-start assist control will be activated.
(P.259)
For fuel-efficient driving
■
Keep in mind that hybrid vehicles are similar
to conventional vehicles, and it is necessary
to refrain from activities such as sudden
acceleration. (P.263)
Driving in the rain
■
Drive carefully when it is raining, because
●
visibility will be reduced, the windows
may become fogged-up, and the road
will be slippery.
Drive carefully when it starts to rain,
●
because the road surface will be espe-
cially slippery.
●
Refrain from high speeds when driving on
an expressway in the rain, because there
may be a layer of water between the tires
and the road surface, preventing the
steering and brakes from operating prop-
erly.
■
Restraining the hybrid system output
(Brake Override System)
When the accelerator and brake pedals
●
are depressed at the same time, the
hybrid system output may be restrained.
●
A warning message is displayed on the
multi-information display and head-up
display (if equipped) while the system is
operating. (P.391)