Lexus UX 250h 2020 Owner's Manual page 82

80
2-1. Instrument cluster
(P.435)
WARNING
The information display at low tem-
■
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver's shifting and the new gear number
appearing on the display. This lag could
cause the driver to downshift again,
causing rapid and excessive engine brak-
ing and possibly an accident resulting in
death or injury.
NOTICE
To prevent damage to the engine and
■
its components
Do not let the indicator of the tachom-
●
eter enter the red zone, which indi-
cates the maximum engine speed.
● The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H). In this case, imme-
diately stop the vehicle in a safe place,
and check the engine after it has
cooled completely. (P.410)
Odometer and trip meter dis-
play
Display items
■
 Odometer
Displays the total distance the vehicle has
been driven.
 Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
display different distances independently.
 Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
Changing the display
■
Each time the "ODO TRIP" switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
Pop-up display
■
Distance until the next engine oil
change will displayed when a warning
message indicating that oil mainte-
nance should be performed soon or is
required is displayed.
Changing the instrument panel
light brightness
The brightness of the instrument panel
lights can be adjusted.