Lexus UX 250h 2020 Owner's Manual page 316

314
5-6. Using the other interior features
a stepladder or other sturdy, safe
device to reach the "Learn" or
"Smart" button on the garage door
opener motor.
Programming HomeLink
■
1 3
Steps through
within 60 seconds, otherwise the indi-
cator light will stop flashing and pro-
gramming will not be able to be
completed.
1
Press and release the HomeLink
button you want to program and
check that the HomeLink
tor light flashes (orange).
2 Point the remote control transmit-
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
Keep the HomeLink
view while programming.
3 Program a device.
®
must be performed
®
®
indica-
®
buttons.
®
indicator light in
Programming a device other than

an entry gate (for U.S.A. owners)
Press and hold the remote control
transmitter button until the
®
HomeLink indicator light changes
from slowly flashing orange to rapidly
flashing green (rolling code) or contin-
uously lit green (fixed code), then
release the button.
Programming an entry gate (for

U.S.A. owners)/Programming a
device in the Canadian market
Press and release the remote control
transmitter button at 2 second inter-
vals, repeatedly, until the HomeLink
indicator light changes from slowly
flashing (orange) to rapidly flashing
(green) (rolling code) or continuously
lit (green) (fixed code).
4
Test the HomeLink
pressing the newly programmed
button and observing the indicator
light:
 Indicator light illuminates: Program-
ming of a fixed code device has
completed. The garage door or
other device should operate when a
®
HomeLink button is pressed and
released.
 Indicator light flashes rapidly: The
garage door opener motor or other
device is equipped with a rolling
code. To complete programming,
firmly press and hold the
®
HomeLink button for 2 seconds
then release it.
 If the garage door or other device
®
®
operation by