Lexus UX 250h 2020 Owner's Manual page 421

Outside temperature
A
SAE 0W-16 is the best choice for good
fuel economy and good starting in cold
weather.
If SAE 0W-16 is not available, SAE
0W-20 oil may be used. However, it
must be replaced with SAE 0W-16 at
the next oil change.
Oil viscosity (0W-16 is explained here
as an example):
• The 0W in 0W-16 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
Cooling system
*
Capacity
Coolant type
*
: The coolant capacity is a reference quantity.
If replacement is necessary, contact your Lexus dealer.
Gasoline
6.3 qt. (6.0 L, 5.3 Imp.qt.)
engine
Power con-
1.7 qt. (1.6 L, 1.4 Imp.qt.)
trol unit
Use either of the following:
• "Toyota Super Long Life Coolant"
• Similar high-quality ethylene glycol-based non-
silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid tech-
nology
Do not use plain water alone.
8-1. Specifications
starting of the engine in cold
weather.
• The 16 in 0W-16 indicates the vis-
cosity characteristic of the oil when
the oil is at high temperature. An oil
with a higher viscosity (one with a
higher value) may be better suited if
the vehicle is operated at high
speeds, or under extreme load con-
ditions.
How to read oil container label:
API registered mark is added to some
oil containers to help you select the oil
you should use.
419
8