Lexus UX 250h 2020 Owner's Manual page 238

Table of Contents

Advertisement

236
4-5. Using the driving support systems
If "Parking Assist Unavailable" is dis-
played on the multi-information display
Water may be continuously flowing over
the sensor surface, such as in a heavy
rain. When the system determines that it
is normal, the system will return to nor-
mal.
Initialization may not have been per-
formed after a 12-volt battery terminal
was disconnected and reconnected. Ini-
tialize the system. (P.236)
If this message continues to be displayed
even after initialization, have the vehicle
inspected by your Lexus dealer.
If a 12-volt battery terminal has been
disconnected and reconnected
The system needs to be initialized. To initial-
ize the system, drive the vehicle straight
ahead for 5 seconds or more at a speed of
approximately 22 mph (35 km/h) or more.
Sensor detection information
The sensor's detection areas are limited
to the areas around the vehicle's front and
rear bumpers.
The following situations may occur
during use.
• Depending on the shape of the object
and other factors, the detection distance
may shorten, or detection may be impos-
sible.
• There will be a short delay between
object detection and display. Even at low
speeds, there is a possibility that the
object will come within the sensor's
detection areas before the display is
shown and the warning beep sounds.
• It might be difficult to hear the buzzer due
to the volume of the audio system or air
flow noise of the air conditioning system.
• It may be difficult to hear the buzzer if
buzzers for other systems are sounding.
Conditions under which the function
may not function correctly
Certain vehicle conditions and the sur-
rounding environment may affect the ability
of a sensor to correctly detect objects. Par-
ticular instances where this may occur are
listed below.
There is dirt, snow or ice on a sensor.
(Cleaning the sensors will resolve this
problem.)
A sensor is frozen. (Thawing the area will
resolve this problem.)
In especially cold weather, if a sensor is
frozen the sensor display may be dis-
played abnormally, or objects, such as a
wall, may not be detected.
A sensor is covered in any way.
When a sensor or the area around a sen-
sor is extremely hot or cold.
On an extremely bumpy road, on an
incline, on gravel, or on grass.
The vicinity of the vehicle is noisy due to
vehicle horns, motorcycle engines, air
brakes of large vehicles, or other loud
noises producing ultrasonic waves.
There is another vehicle equipped with
parking assist sensors in the vicinity.
A sensor is coated with a sheet of spray
or heavy rain.
If a sensor is hit by a large amount of
water, such as when driving on a flooded
road.
If the vehicle is significantly tilted.
The vehicle is approaching a tall or
curved curb.
If objects draw too close to the sensor.
Objects which may not be properly
detected
The shape of the object may prevent the
sensor from detecting it. Pay particular
attention to the following objects:
Wires, fences, ropes, etc.
Cotton, snow and other materials that
absorb sound waves
Sharply-angled objects
Low objects
Tall objects with upper sections project-
ing outwards in the direction of your vehi-
cle
People may not be detected if they are
wearing certain types of clothing.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents